Q factor and frequency data for parallel plate resonator calibration

Microwave surface resistance is evaluated using a novel parallel plate resonator fixture through the direct measurment of Quality factor and resoant frequency. 

Measurment data is available in .xlsx format, where measurments for each samples plate are recorded as coloum entries consiting of Frequency (Hz), Quailty factor and evaluated surface resistance(Ohms). Each table row corresponds to repeated measurment results. Samples measured include buk Al6082 and silver plated Al6082 as well as additive manufactured AlSi10Mg and Ti6Al4V.

All measurments have been taken on a Keysight PNA under standard laboratory conditions.  

Research results based upon these data are published at http://doi.org/10.1109/TMTT.2020.3035082