Design of an electric activation system for the smart hybrid tendons crack-closure system in concrete beams.

<p dir="ltr">"<i>B1", "B2", "B3", "B4</i>". Each sheet within the excel worksheet contains the results of the three-point bending test performed on the four beams to test the Hybrid Tendons activation as reported in the paper. The three-point bending results are reported in terms of Force (kN) and Crack mouth Opening Displacemet or CMOD (mm). The files contain the plots Force-CMOD for each case study before and after the tendons activation as described in the paper.</p><p dir="ltr">"<i>Crack width</i>". The files also contain the estimation of crack closure estimated by the data collected during the test.</p><p dir="ltr"><br>"<i>Concrete Mix</i>". This worksheet shows the concrete mix adopted in the experimental campaign for all the specimens.</p><p><br></p><p dir="ltr">"<i>Mathcad</i>". A worksheet with the results of the numerical modelling is also present. The numerical model results are preented in termos of Force (kN), CMOD(mm) and Bending Moment (kNm).<br></p><p dir="ltr">Research results based upon these data are published at https://doi.org/10.1016/j.dibe.2024.100446</p>